Skip to content
Amptech Pty Ltd — calibration services Perth
Workplace test & tag · Southern suburbs

Test & Tag in Kwinana

On-site inspection, testing and tagging to AS/NZS 3760 for Kwinana workplaces — heavy industry — with a full compliance register and reminders before the next round is due.

Kwinana is Western Australia's heavy-industrial heartland — the Kwinana Industrial Area's processing plants, the port, and the maintenance contractors, fabricators and suppliers that serve them from the surrounding estates. Contractors working inside the industrial area need current calibration certificates and test & tag registers to get through site inductions.

Who we test & tag in Kwinana

  • Maintenance and shutdown contractor workshops
  • Fabrication and engineering shops
  • Industrial suppliers and hire yards
  • Town-centre offices and services

AS/NZS 3760 intervals for Kwinana workplaces

The re-test frequencies that apply to the environments we most often see in Kwinana. We confirm the classification for each area on the first visit.

EnvironmentInterval
Factories, workshops & warehouses6 months
Building & construction sites3 months
Hire equipment (inspection / test)3 / 12 months
Offices, shops & low-risk areas12 months

What we test & tag

  • Portable power tools
  • Office & kitchen appliances
  • Extension leads & power boards
  • Battery chargers & adaptors
  • Site & workshop equipment
  • RCDs (safety switches)
  • New equipment (out-of-box)
  • Hire & loan equipment

Calibration pickup & drop-off in Kwinana

Test & tag happens at your premises. Calibration does not — it is bench work performed in our Caversham lab against references traceable to national standards. While our technician is in Kwinana for the round, we collect any instruments that are due and return them with their certificates, so you deal with one supplier and one invoice.

See every instrument we calibrate

Getting to Kwinana

Off the Kwinana Freeway via Thomas Road and Anketell Road, with Rockingham Road and Patterson Road serving the industrial area.

FAQ

Test & tag in Kwinana FAQs

We do shutdown work in the Kwinana Industrial Area — can you get our instruments certified before a shutdown?
Yes. Tell us the shutdown date when you book. We collect from your Kwinana workshop, calibrate in our Caversham lab, and confirm the turnaround in writing so certificates are ready for the induction.
What interval applies to tools used inside processing plants?
Contractor tools used in plant maintenance are generally treated as workshop or construction-type environments — 6 or 3 months under AS/NZS 3760 depending on the work. We confirm the classification with you and set the register accordingly.
Is test and tag a legal requirement?
Under WHS law every employer has a duty to keep electrical equipment safe. AS/NZS 3760 is a standard rather than a law in itself, but it is the recognised way to meet that duty — and on construction and demolition sites, WHS regulations make testing and tagging of portable equipment a requirement.
What is included in a test and tag?
A visual inspection, an electrical safety test with a calibrated appliance tester, a durable tag showing the test and due dates, and an itemised register of results for your records.
Related

Industries & guides for Kwinana

Mining

Mining calibration in Perth

AmpTech supports Perth-based mining offices, workshops and FIFO bases with traceable calibration of the test and measurement equipment that keeps safety and production audits clean. Our reference standards are traceable to national standards and every calibration runs under our ISO 9001 certified quality management system.

Learn more
Manufacturing

Manufacturing calibration in Perth

Perth manufacturers depend on accurate dimensional and temperature instruments to keep production within tolerance. AmpTech calibrates them against reference standards traceable to national standards and gives you the documentation a quality audit expects to see.

Learn more
Construction

Calibration and test & tag for Perth construction

Construction sites in Perth have to keep portable electrical equipment safe and tested every three months under AS/NZS 3760 — and the multimeters and clamp meters used to commission services need to be calibrated. AmpTech handles both: test & tag on your site, calibration in our Caversham lab.

Learn more
Guide

AS/NZS 3760 test and tag intervals explained

AS/NZS 3760 is the standard that drives test and tag in Australian workplaces. Here is how the intervals are set, where 3 months is required vs where 12 months is enough, and how to keep a register the regulator will accept.

Learn more
Guide

Test and tag vs calibration: what is the difference?

These two terms get used interchangeably — and they should not be. One says the equipment is safe to plug in; the other says its readings are accurate. Here is the difference and how to plan both.

Learn more

Book test & tag in Kwinana

Tell us the site and roughly how many items, and we will quote the round and any calibration pickups in writing.

Get a Free Quote 0434 934 711
CallGet a Quote